50 N–5 kN | Class 0.5 Accuracy | Tensile, Compression, Bending & Peel Testing
The ITM-LAB RS-8010A Single Column Universal Testing Machine is designed for precision mechanical testing of materials and small components, with selectable capacities from 50 N to 5 kN.
Driven by an AC servo motor and precision ball screw, the machine supports tensile, compression, bending, peel, tear and shear tests using interchangeable grips and fixtures.
It is suitable for plastics, rubber, films, adhesives, wire and cable, textiles and other low-force testing applications in R&D and quality control.
50 N–5 kN Capacity | Class 0.5 Accuracy | 0.01–500 mm/min | 650 mm Stroke
Key Features
| Feature | Specification |
|---|---|
| Multiple Force Capacities | 50 N to 5 kN for different low-force applications |
| Class 0.5 Accuracy | Precise force measurement |
| Controlled Test Speed | 0.01–500 mm/min |
| Servo-Driven System | AC servo motor with precision ball screw |
| Interchangeable Fixtures | Tensile, compression, bending, peel, tear and shear |
| Computer-Controlled Testing | Test control, data recording, curves and reports |
Testing Applications & Fixtures
The RS-8010A accommodates different test methods through interchangeable grips and fixtures. The configuration is selected according to the specimen, expected force and applicable test standard.
| Test Method | Typical Applications | Fixture |
|---|---|---|
| Tensile | Plastics, rubber, wires, films and textiles | Tensile grips |
| Compression | Small components and material specimens | Compression platens |
| Bending | Plastics and small material samples | Flexural fixture |
| Peel | Adhesive tapes and flexible laminates | 90° / 180° peel fixture |
| Tear | Rubber, films and textiles | Application-specific grips |
| Shear | Small components and bonded materials | Dedicated shear fixture |
Custom fixtures are available for non-standard specimens and specialized test requirements.
Testing Software
The computer-controlled software allows operators to set test parameters, run tests and review measurement data.
Depending on the selected software configuration, functions include:
-
Test setup and machine control
-
Real-time force–displacement curves
-
Test data recording and analysis
-
Result storage and report generation
Technical Specifications
| Parameter | RS-8010A |
|---|---|
| Capacity Options | 50 N / 100 N / 200 N / 500 N / 1 kN / 2 kN / 5 kN |
| Equipment Accuracy | Class 0.5 |
| Load Resolution | 1/500,000 |
| Test Speed | 0.01–500 mm/min |
| Optional Speed | 0.01–1000 mm/min |
| Speed Accuracy | ±0.5% |
| Displacement Resolution | 0.001 mm |
| Maximum Stroke | 650 mm (excluding grips) |
| Optional Stroke | 1000 mm |
| Effective Width | 130 mm |
| Drive System | AC servo motor + precision ball screw |
| Extensometer | Optional |
| Dimensions | 500 × 600 × 1280 mm |
| Optional Dimensions | 500 × 600 × 1580 mm |
| Weight | Approx. 140 kg |
| Power Supply | AC 220 V, 5 A or specified |
Specifications may vary by configuration. Confirm the effective test space and required accessories before ordering.
Test Methods & Standards
The RS-8010A can be configured for selected ASTM and ISO mechanical testing methods.
| Application | Reference Standards |
|---|---|
| Plastic Tensile | ASTM D638 / ISO 527 |
| Rubber Tensile | ASTM D412 / ISO 37 |
| Adhesive Tape Peel | ASTM D3330 |
| Plastic Flexural | ASTM D790 / ISO 178 |
Compliance depends on the complete test configuration, including the load cell, grips, test speed, specimen geometry and applicable standard edition.
Application Industries
The RS-8010A supports low-force mechanical testing across a range of industrial and laboratory applications.
| Industry | Typical Testing Applications |
|---|---|
| Electronics & Connectors | Terminal pull, connector retention and small-component force testing |
| Wire & Cable | Tensile strength, breaking force and cable pull testing |
| Plastics & Rubber | Tensile, compression, bending and tear testing |
| Packaging & Films | Film tensile, peel and seal strength testing |
| Adhesives & Tapes | 90°/180° peel and adhesive bond testing |
| Textiles & Nonwovens | Fabric tensile, thread breaking force and tear testing |
Request an RS-8010A Configuration & Quotation
Send us your specimen details, required test method, expected force range and applicable standard.
Our engineers can recommend the appropriate load capacity, fixtures and machine configuration.
What force capacities are available?
The RS-8010A offers selectable capacities from 50 N to 5 kN, depending on the expected test force.
Can one machine perform different tests?
Yes. Tensile, compression, bending, peel and other supported tests can be performed by changing the appropriate fixtures.
Can it test thin films and fine wires?
Yes, with a suitable low-force load cell and grips designed for the specimen.
Can ITM-LAB provide custom fixtures?
Yes. Fixtures can be customized according to specimen dimensions, loading direction and test requirements.
