Global Leader in Testing Equipment
This UTM are suitable for the testing of tensile, compression, shearing force, adhesion, peeling force, tear strength, fatigue etc for semi-product & finished product in the field of rubber, plastic, metal, nylon, non-woven fabrics, textile, tape, polyfoam, waterproof material, electric wire, electric cable, etc., which are the basic facilities for input quality control(I.Q.C), Quality Control(Q.C.), Physical inspection, Mechanics research and material development.
Can achieve the closed loop control in force value, speed & displacement, so can satisfy the fatigue test of rubber and durable test of other material in the condition of low cycle.
Can record and memorize the whole testing data.
|Capacity (optional)||100N, 200N, 500N, 1, 2, 5, 10, 20, 30, 50KN|
|Unit (switchable)||N, KN, Kgf, Lbf, Mpa,Lbf/In2, Kgf/MM2|
|Power system||Japan Panasonic serve motor|
|Italy Motovaria gearbox|
|Japan Mitsubishi synchronous belts|
|Taiwan ABBA ball screw|
|Stroke (exclude the grips)||800mm,1000mm (optional)|
|Effective width||400mm, 500mm (optional)|
|Motor||AC servo Motor|
|Main unit dimension||W830xD670xH1940mm|
|Main unit weight||345Kg|
|Power supply||AC220V 5A or specified by user|