- Precise Temperature Control: Ensures reliable results with minimal deviation.
- Stable Performance: Designed for consistent and accurate testing.
- Wide Testing Range: Covers temperatures from -40°C to +150°C and low pressures up to 1kPa.
- Multi-Layer Protection: Guarantees safe operation under extreme conditions.
The Battery Spray Combustion Tester is designed for lithium battery (or battery pack) flame resistance test. In an experimental platform to drill a diameter of 102mm holes, and in the holes placed on a wire mesh, the battery under test on the wire mesh screen, installed around the specimen in an octagonal aluminum wire mesh, and then ignite the burner, the specimen burst into heat until the battery explodes or the battery burned down, and the combustion process is timed.
Test standard
UL2272-2016，UL2271-2013，GB/T31241-2014，GB/T 18287 -2013
GB/T8897.4-2008，YD/T 2344.1-2011，GB/T 31485-2015
The RS-8000A2-50KN Battery Puncture and Compression Tester is designed for testing battery and power battery packs under puncture and compression conditions. It simulates potential risks like local thermal runaway or internal short circuits caused by compression or external puncture forces. During the test, real-time data on puncture force, stroke, battery surface temperature, and voltage changes are collected and synchronized.
The Controlled Drop Test Machine is designed for cell phone, walkie-talkie, electronic dictionary, building and apartment intercom telephone, CD/MD/MP3 and other small consumer electronic products and parts for free fall test, in order to assess the product at a certain height by diamond, corner, surface drop test, function and structure is reliable.
- Versatile Testing: Evaluates packaging resistance to forklift clamping during transportation.
- Standards Compliance: Meets ASTM D6055, ISTA, GB/T 4857.4, and other international standards.
- High Precision: Adjustable clamping pressure (100–2000 kgf) with sensor-based calibration for accuracy.
- Robust Design: Durable clamping panels with guaranteed flatness and alignment under maximum pressure.
- User-Friendly Control: Touchscreen PLC controller with automated and manual operation modes.
- Safety First: Built-in overload, overpressure, and sudden power failure protection systems.
The Compound Salt Spray Test Chamber is a device that simulates the dispersion system composed of tiny salt droplets in the atmosphere. It is widely used in salt spray corrosion tests for electronics, electrical engineering, automobiles, motorcycles, hardware, plastics, FPC soft boards, electroplating products, etc. It can meet the requirements for
The RS-6005 Explosion-proof Battery Testing Box is specifically designed to protect both operators and equipment during overcharge, over-discharge, and charge/discharge tests. By enclosing the battery inside the explosion-proof box and connecting it to an external charge/discharge tester, it ensures the safety of the testing process. The box can be customized according to specific testing requirements.
High and low temperature battery extrusion tester RS-6006A-GDW is designed for simulate the battery extrusion test in high and low temperature environment.
Test standard
GB 31241-2014,GB/T8897.4-2008,YD/T 2344.1-2011,GB/T 21966-2008,MT/T 1051-2007,YD 1268-2003,GB/T 19521.11-2005,YDB 032-2009,UL1642,UL 2054, IEC62281,IEC 60086 IEC62133 UN38.3 test standards. IEC62281,IEC 60086 IEC62133 UN38.3 and other test standards.
- High Precision and Speed: Equipped with a Panasonic AC servo motor, precision ball screw, and linear guide system for high-speed, high-precision positioning.
- Real-time Data Collection: Continuously collects puncture force, travel distance, surface temperature, and voltage with no steps and high resolution.
- Remote Control and Data Acquisition: Supports high-speed Ethernet remote control and data collection, effective over distances of up to 100m.
- Comprehensive Safety Testing: Simulates puncture/extrusion forces to assess battery safety, optimizing products based on real-time data.
- Complies with Industry Standards: Meets the safety and testing requirements outlined in GB/T 31485-2015 for electric vehicle power batteries.
