Global Leader in Testing Equipment
Apply for compression resistance, deformation, stacking test of package container such as corrugated paper box and honeycomb box, and also the wooden package box.
This machine is to evaluate the anti-impact strength in the process of shipping and carrying.
This test equipment mainly applies to the detection of the bearing capacity of the product package clamped by forklift clamps during the transport process, and the evaluation of the protective capacity of product package to the inner packaged goods through the simulation test.
This tester is suitable for testing the packing situation after free dropping and to evaluate the anti-impact strength in the process of shipping.
Apply for industrial of electronic parts, houseware, wire, metal, bicycle, handbag, foodstuff, footwear, furniture, etc. to do burst resistance strength test on sample and corrugated cartons, also can be used for synthetic leather testing & textile testing & paper and paperboard testing.
Apply for ring pressure test on corrugated paper or leather paper below 1mm. With high precision roll ball rod to drive pressure plate working, do the pressing stably in right orbit, also the high precision conductor can get the pressure signal and show the test data on digital displayer. combined with the attachments to check the strength under horizontal pressure, flat pressure and adhesive pressure.
A product must have strict quality control after R&D, design, manufacturing and even packaging, This testing machine aims at the situation that the product will inevitably encounter impact due to falling or collision in the process of transportation. Therefore, the design of packaging materials is very important in order to keep the packaging contents intact in the transportation process and avoid the damage of goods. And the test value of package dropping test provides the basis of cushion package design.
RS-V electromagnetic vibration testers are perfect for the vibration testing for the household goods, electronic products, car parts, and portable equipments etc.
Apply for conveyance test of toys, electronic parts, houseware, IT, communication, furniture, gift, package in compliance with USA & EURO shipping standards.
This tester is made according to CNS requirement, this tester is to do the durability testing by simulating the stroller cross the barricade. The testing method is to put the infant model inside the stroller, raise the stroller to get the back wheels up 150mm from the ground, then press the handle down to get the front wheels up to 150mm from ground, and to do this action with the speed 15cycles/min. After 3000cycles continuous testing, to check the stroller if damage. The tester will automatically stop when reach the set testing cycles.