Model:RS-6600A
Application
The machine is used in the insertion and extraction force tests of various kinds of connectors. Equipped with an automatic axopetal device and the special fixture for all kinds of connectors, it can ensure accurate insertion and extraction force results. The machine adopts the Windows proaram, which is easy to operate and can automatically store test data (such as load-stroke curve,load life die-away curve and test results) and all test conditions, The machine also adopts high-precision load cell measurement and servo motor drive, which ensures accurate insertion and extraction force results, making it an essential detecting instrument in the development and research and quality inspection of connector manufacturers and finished products manufacturers
- Connector whole line insertion and extraction test.
- Connector single port insertion and extraction test.
- Connector insertion and extraction duration test.
- Connector single pin and plastic retention test.
- Connector normal force test.
- Connector clip compression test.
- Connector dynamic impedance test.
- Various tensile and pressure test.
- Connector dynamic impedance test(optional).
Full-automatic test method
The tester only needs to input and store the test conditions of the test piece of a certain batch and the machine will conduct the compression and tensiletests automatically;
Widespread application
With different fixtures, it can be used in various connector tests, such as the tensile and compression tests and the endurance and dynamic impedance tests of R&D and IQC finished connectors. After the test, it can automatically store the test curves and data;
High precision
The load resolution can reach up to 0.01gf and the stroke resolution,0.001mm.
Unit switchover
The units of load such as N,gf,kgf and Lb can be switched freely, so can those of stroke such as mm and cm.
Language switchover
English, traditional Chinese and simplified Chinese are available, which shows good applicability.
Large memory space
The test data (curves and data) can be stored in the computer hard disc (the data for every test can be stored in it, without no limitation on the times).
People-oriented design and user-friendly operation
All test conditions are set on the computer picture:test load, storke, times, speed, waiting time.
People-oriented report design
The head of the report can be modified (both in English and Chinese) at any time. The report can be generated automatically.
The machine can print data and curve reports without your inputting them again.
Automatic test results judging and analysis
You may input the upper and lower limit specification values of the compression or tensile load, and the machine can automatically judge whether the test results pass or fail and analyze the results.
Roll curve display
It can automatically generate tensile and compression curves. The insertion is positive value, while the extraction, negative value.