Auto Tumble Tester

This tester is used for continuous rolling drop test for mobile, CD/MP3, PDA at etc.

Automatic Drop Tester

The machine is aimed at assessing the effect of unintentional drop of the product by user in actual use on the product performance, which is applicable to the original-gesture drop test of mobile phone, tablet, e-reader, telephone, e-dictionary and other consuming electronic products.

Repetitive Heavy Set Down Tester

Apply for micro-drop repeating testing of mobile phone, tablets, electronic dictionary, etc. The check if the products function normal or not after certain cycles tests.

Micro-Drop Tester

Apply for repeating dropping (light dropping) testing of mobile phone, telephone receiver, interphone, MP3, CD, electronic dictionary, etc. To check if the products’ parts and function normal or not after many times light dropping.

Repetitive Heavy Set Down Tester

Ball Impact Tester

This tester is used to measure the impact resistance by the specified steel ball at specified height. It applies for ceramics, acrylic, glass, plastic and etc.

DUPON Impact Tester

This machine is applicable to impulse test of material test block as plastic, PVC, and coating test block, put coating of test block upward and under ram of the machine and check damage and transformation condition after heavy punch falling and strike of a certain height.

Vertical Rebound Resilience Tester

This tester is to test the resilience of rubber by vertical rebound. Level the tester and raise the plunger at a given height above the specimen. Release the plunger to slide freely on its guiding rod and then record the average resilience height for the 4th, 5th, and 6th impacts.

Laminated Glass Falling Ball Impact Tester

This tester is design according to the standard GB/T9962-1999-6.11. It satisfies the architecture laminated glass impact testing requirement.

Semi-automatic Drop Tester

This tester is used for dropping test for mobile, phone earphone, interphone, MP3, CD, electronic dictionary, and the other electronic devices or parts. For checking the device quality after N times free dropping off from a stated height and different side, corner and face.