In addition to testing the adaptability and the characteristics of the product had been changed under the general conditions of temperature and humidity combination (High-low temperature & storage, temperature cycling, high temperature and high humidity or moisture condensation test) by simulatable products.
High and low temperature test chamber applying to electrical engineering, electronic products, components and the adaptive test of materials during storage, transportation and use in high and low temperature.
This machine is to test heat endurance, cold endurance, dry endurance, wet endurance of various materials. It applies for quality control of electronic goods, electric appliance, measurement device, food, automobile, metal, chemical, plywood, aviation, medical and etc.
The programmable thermal shock tester is for testing the capability of the parts and material in extreme high temperature and extreme low temperature in a shortest time continuously to check the chemical and physical change owing to the shrink ager up. It applies for metal, plastic, rubber, electronic and so on.
This machine is to test heat endurance, cold endurance, dry endurance, wet endurance of various materials. It applies for quality control of electronic goods, electric appliance, measurement device, automobile, metal, chemical, plywood, aviation, medical and etc.
This equipment is used for the testing of radiator modules, power supplies, servers, etc. It provides a cavity for the test environment under the condition of natural convection and no external air supply. The temperature control is achieved by the balance between the heater and the natural convection of the external environment.test environment.
The test chamber, which meets the requirements specified in relevant standards including GB4706, GB4208 and GB2423, is used to test the rainproof performance of the equipment with rainproof function. It is applicable to the test of IPX1, IPX2, IPX3 and IPX4. It is provided with touch screen display and glass door with windscreen wiper.
This chamber is suitable for the product to do the temperature and humidity testing. Inner box size, the temperature and humidity range, and special requirement can be customized. Laboratory floor loading capacity: 600Kg/m2 (uniform load).
Due to difference of light source,illumination and environment, it’s difficult for product to be differentiated in color matching and color assessment, and color misjudging always happens. So this light box is specially designed for providing standard and objective luminosity, used for accurately proofreading product color to accurately control quality and comparison of product material and color.